Welcome to Washloo, the UKs Leading Smart Toilet Specialists!

New collections added! Learn more

Smart Toilets in Flats and Apartments

Smart Toilets in Flats and Apartments

Mark Woodcock |

Living in a flat doesn't rule out a smart toilet. In fact, a bidet seat can be one of the easiest bathroom upgrades a flat owner can make, because it uses the toilet you already have and needs no extra floor space. That said, flats come with a few practical considerations that houses don't, from leases to neighbours below. Here's what we'd think through before choosing from our smart toilet seats and toilets.

1. Start with your lease

If you own a leasehold flat, have a quick read of your lease before planning any bathroom work. Many leases ask you to get permission from the freeholder or managing agent before altering plumbing or electrics, and a few have specific rules about bathroom works. Swapping a toilet seat is usually a very minor job, but if you're replacing the whole toilet or adding a new socket, it's worth checking first. A short email now is far easier than a dispute later.

2. Water supply and pressure

A bidet seat normally takes its water from the same cold feed as your cistern, using a T-piece. In most flats that's straightforward. Water pressure can vary more in some blocks, particularly on upper floors or where the building relies on a shared tank or booster pump. If your shower or taps already feel weak, mention it when you speak to us, and we'll check the requirements of the seat you have in mind against your setup.

3. Power in a small bathroom

Your seat will need a power supply within reach of its cable. Plenty of flat bathrooms have no socket at all, especially older conversions. Electrical work in bathrooms has to follow specific safety rules about where outlets can go, so this is a job for a qualified electrician, who can advise on the safest option for your room.

4. Noise and the neighbours

It's natural to wonder whether the people downstairs will hear your new toilet at 2am. In practice, a wash cycle and a warm air dryer are quiet, steady sounds, generally softer than an extractor fan. Flushing noise depends more on the toilet and the pipework than on the seat. If you're replacing the whole toilet, quieter flushing is something we're happy to talk through, and we've written about quieter bathrooms in open-plan suites, where noise matters just as much.

5. Internal and compact bathrooms

Many flats have windowless bathrooms that rely entirely on an extractor fan. Features such as a built-in deodoriser can help a small, enclosed room feel fresher between uses, and a soft night light saves you from snapping on a bright overhead light late at night. Where space is tight, a compact seat or a toilet without a bulky cistern can make the room feel noticeably larger.

Renting rather than owning?

Tenants can enjoy a bidet seat too. Because a seat replaces your existing one and can be removed when you move, it's often an easier conversation with a landlord than you might expect. Always ask first and keep the original seat safe.

Frequently asked questions

Can I install a smart toilet in a flat? Yes, in most cases. A bidet seat fits onto your existing toilet and needs a cold water feed and a nearby power supply. Check your lease if you plan to change plumbing or electrics, and use a qualified electrician for any new outlet.

Are smart toilets noisy? Not particularly. The wash and dry functions make a gentle, steady sound that most people find quieter than a bathroom extractor fan.

 

If you'd like a hand working out what will suit your flat, get in touch and tell us a little about your bathroom.